The Model BSIL-W10-A Liquid Level System consists of a series of vessels containing liquid level sensors interconnected by a liquid filled tube。 A reference vessel is positioned at a stable location with observation vessels positioned at different locations at approximately the same elevation。 It is suitable for settlement monitoring, including road/railway subgrades, bridges, tunnels, dams, foundation pits,building foundations。
The BSIL-W10-A Liquid Level Sensor-北京SOIL仪器有限公司 is based on Vibrating Wire Sensor which is particularly suitable for critical situations where high resolution is required。 Settlements as small as 0。01 mm are detectable。
◆Accurate and precise measurements using Vibrating Wire sensors
◆Very high resolution
◆Robust design and reliable
◆In-built temperature compensation
Range： 50mm | 100mm | 150mm | 300mm | 600mm
Resolution： 0.025% F.S.
Accuracy： ±0.1% F.S.
Temperature Range： -20 to + 80°C
This system is particularly suitable for critical situations where high resolution is required.
A series of vessels are interconnected by a liquid-filled tube. One reference vessel is located on stable ground and the other vessels are located at the points of settlement. Each vessel contains a cylindrical weight suspended from a vibrating wire transducer.
The common liquid level inside each vessel partially submerges the hanging weights; settlement of a vessel causes an apparent rise of the water level in that vessel leading to a greater buoyancy force on the weight and a reduction in the tension and frequency of the vibrating wire.